KW Amplifier Burst 1000A , 1500A , 2000A.

• Output power: 1.8 - 30 MHz - 2200 W PEP (SSB and CW) , 50 - 54 MHz - 1100 W
• All bands HF, including WARC bands and 6 meters
• Rated Input Power: 15W
• The mains voltage VAC 230
• LCD display
• Control over Ethernet
• Modern design
• Intuitive menu

• All types of protection:

- SWR
- overcurrent
- overheat protection
- exceeding the input power
- switching error protection range (LPF Error)
• Permissible operating conditions - Working temperature range: -10 ° C (antifreeze) + 40 ° C - Relative humidity 95% (at 35 ° C)
• Dimensions of the device (without protrusions) - 395 x 353 x 153 mm.
• Weight - 18 kg.
• Color TFT display with a diagonal of 4.3 inches (95 x 53 mm), a resolution of 480 x 272 pixels and 24-bit color
• There is a possibility of remote control via Ethernet
• The operator is able to monitor all the main characteristics of the operating mode into digital form
• Statistics of failures - in the non-volatile memory to store detailed information about all the contingencies PA
• Modern security scheme to ensure the integrity of electrical circuits device
• Lightweight and compact with respect to its power
• Suitable for use with any transceiver
• Controlled standard signals. Enabling transmission mode (PTT) is performed by applying zero. Rated power at the RF input device 15 W
• Yield transceiver is well matched to the broadband input. The SWR is at around 1.2: 1 in the range 1.8 - 54 MHz without any adjustments
• Automatic control of the transceiver by CAT protocol. PA continuously monitors the operating frequency and produces a change in the ranges
• Integrated frequency counter, band decoder and connect AUX, in the case of non-compound CAT determines the frequency and allow to correctly operate the amplifier operating range
• FETs type MRF1K50H (MOSFET) capable of absorbing high levels of mismatch of the output (high SWR)
• Exceptional electromagnetic compatibility with different aggregates on sensitivity, allows to connect to virtually any device
• A solid protection from current surges and automatic compensation of reactive power is achieved by switching power supply quality • The range of input voltage (85-300 V)



• Output power: 1.8 - 30 MHz - 1100 W PEP (SSB and CW), 50 - 54 MHz - 550 W
• All bands HF, including WARC bands and 6 meters
• Rated Input Power: 15W
• The mains voltage VAC 230
• LCD display
• Control over Ethernet
• Modern design
• Intuitive menu
• All types of protection:

- SWR
- overcurrent
- overheat protection
- exceeding the input power
- switching error protection range (LPF Error)
• Permissible operating conditions - Working temperature range: -10 ° C (antifreeze) + 40 ° C - Relative humidity 95% (at 35 ° C)
• Dimensions of the device (without protrusions) - 310 x 353 x 153 mm.
• Weight - 14 kg.
• Color TFT display with a diagonal of 4.3 inches (95 x 53 mm), a resolution of 480 x 272 pixels and 24-bit color
• There is a possibility of remote control via Ethernet
• The operator is able to monitor all the main characteristics of the operating mode into digital form
• Statistics of failures - in the non-volatile memory to store detailed information about all the contingencies PA
• Modern security scheme to ensure the integrity of electrical circuits device
• Lightweight and compact with respect to its power
• Suitable for use with any transceiver
• Controlled standard signals. Enabling transmission mode (PTT) is performed by applying zero. Rated power at the RF input device 15 W
• Yield transceiver is well matched to the broadband input. The SWR is at around 1.2: 1 in the range 1.8 - 54 MHz without any adjustments
• Automatic control of the transceiver by CAT protocol. PA continuously monitors the operating frequency and produces a change in the ranges
• Integrated frequency counter, band decoder and connect AUX, in the case of non-compound CAT determines the frequency and allow to correctly operate the amplifier operating range
• FETs type MRF1K50H (MOSFET) capable of absorbing high levels of mismatch of the output (high SWR)
• Exceptional electromagnetic compatibility with different aggregates on sensitivity, allows to connect to virtually any device
• A solid protection from current surges and automatic compensation of reactive power is achieved by switching power supply quality • The range of input voltage (85-300 V)

Burst 1000A Kostet - 3550,00 euro
Burst 1500A Kostet - 4150,00 euro
Burst 2000A Kostet - 4550,00 euro

Sie können sich in Osnabrück ( 49074 ) selbst abholen.
Der Versand per Post innerhalb Deutschlands und in andere Länder ist möglich , Kostet Extra.
Auch eine Zustellung per Kurier innerhalb Deutschlands ist möglich, Kostet Extra.